基于图和子图同构算法的制造特征识别方法

针对传统制造特征难以快速识别的难题,提出了基于图和子图同构算法的制造特征识别方法。通过提取零件模型中的几何信息与拓扑信息,构造出加权属性邻接图,对零件模型进行精准描述,为建立制造特征库,定义了文件数据的存储结构,结合子图同构算法以及相关判定规则实现对常见制造特征的识别与匹配。以Creo软件中生成的零件模型为例,在VS2010平台中进行二次开发,最后以界面窗口形式展示识别结果,验证了该方法的有效性。     

基于WENO-分段线性格式的旋翼流场数值模拟

为了降低二阶JST(Jameson-schmidt-turkel)格式导致的数值耗散,发展了一套适合于格心格式的基于加权本质无振荡(Weighted essentially non-oscillatory,WENO)-分段线性格式的旋翼流场数值模拟方法。采用运动嵌套网格方法生成围绕旋翼的网格系统,主控方程选择Navier-Stokes(N-S)方程。为了更加有效地对桨尖涡等流动细节进行捕捉,在笛卡尔背景网格上采用七阶Roe-WENO格式计算对流通量;在桨叶贴体非结构网格上采用二阶精度的Roe-分段线性格式计算对流通量。时间离散采用了高效的双时间隐式LU-SGS(Lower upper symmetric Gauss-Seidel)方法进行时间推进。最后,应用上述方法对悬停状态的C-T(Caradonna-tung)旋翼和Helishape 7A旋翼进行了数值模拟,将数值计算结果与实验数据进行了对比,计算值与实验值吻合较好;并将桨尖涡模拟效果与二阶JST格式的模拟效果进行了对比。对比结果表明:本文方法能有效对旋翼流场进行计算,且在相同计算条件下,WENO-分段线性格式能够更有效地捕捉旋翼涡流场的流动特性,表明在计算旋翼涡流场时WENO-分段线性格式相比传统二阶JST格式具有更低的数值耗散。     

失效概率矩独立全局灵敏度分析的高效算法

失效概率矩独立全局灵敏度分析对指导可靠性优化至关重要，本文从乘法降维及Edgeworth级数展开的角度提出一种失效概率矩独立全局灵敏度指标分析的高效算法。所提算法通过Edgeworth级数展开将失效概率矩独立全局灵敏度指标的求解转化为输出无条件及条件前四阶整数矩的求解。对于输出的无条件及条件四阶矩的计算，基于乘法降维的思想，本文推导了重复利用计算输出的无条件矩的输入输出样本来计算条件矩以及外层关于输入变量一维积分的计算公式，使得仅需重复利用输出无条件前四阶矩求解产生的积分网格内的数据即可同时求得输出的前四阶条件矩以及外层关于输入变量的一维积分。所提算法大大提高了失效概率矩独立全局灵敏度的分析效率。航空发动机涡轮盘以及汽车前轴的分析结果验证了所提算法的高效性及准确性。     

基于负载惯量匹配的双电机同步控制方法

在交流伺服系统运动控制领域,针对双电机同步精确控制时由于两轴负载惯量相差较大、额定运行速度快、到位精度要求高等控制难点,提出了简单且有效的同步控制方法,并在试验中进行了验证。该方法包括对同步控制方式的设计和误差补偿算法2个部分。首先,设计使用基于虚拟主轴的主从控制方式,可实现惯量匹配的同步指令输出；在此基础上,从负载特性入手,提出了基于加权耦合的误差补偿方法,能实现快速稳定的同步误差补偿。仿真与试验结果表明,该方法能够满足伺服运动系统的定位精度和同步控制精度要求,同时在一定程度上提升了系统的平稳性和补偿响应速度,工程实现效果较好。     

一种基于观测站数目最小化的TDOA/FDOA无源定位算法

在三维（3D）运动目标无源定位系统中，无模糊定位最少需要4个观测站。而传统的两步加权最小二乘（TSWLS）及其改进的闭式算法至少需要5个观测站进行求解，当减少一个观测站时，这些闭式算法往往无法提供可靠解。针对这一问题，提出一种最小化观测站数目的到达时间差（TDOA）与到达频率差（FDOA）定位算法。该算法是一种闭式解法并且能够在三维场景下仅使用4个观测站进行定位。该算法分为两步：第1步分离传统的TSWLS算法中未知参数空间，建立了一组新的等式，并且利用加权最小二乘（WLS）算法得到目标位置与速度的初始值；第2步利用泰勒级数展开算法将中间变量线性化，对目标位置和速度初始值进一步校正。理论分析证明了在适当的噪声水平下该算法能够达到克拉美罗界（CRLB）。此外，计算机仿真表明仅使用4个观测站时，该算法对于近场以及远场目标参数的估计精度在测量噪声较小时可以实现CRLB；并且还表明使用5个观测站估计时，该算法比TSWLS及其改进算法能更好地适应大的测量噪声。     

利用偏振图像加权融合及CLAHE算法的水下成像方法

针对传统基于偏振差分原理的水下光学成像方法中目标退偏振特性差异引起的图像中局部反射光损失的问题,本文提出了基于偏振图像加权融合与限制对比度自适应直方图均衡（Contrast Limited Adaptive Histogram Equalization, CLAHE）算法的水下成像方法。一方面,将原始水下图像分解为偏振光强图像和非偏振光强图像,根据不同退偏振特性目标在两幅图像中的灰度值分布特点,设计相应的权重因子,对两幅图像进行加权融合。从而实现在压缩原始水下图像中散射光的同时,保留更多目标反射光,提升整体目标反射光在融合图像中所占的比例。另一方面,为了进一步提升融合图像的对比度,利用限制对比度自适应直方图均衡算法对融合图像进行处理。该算法能够在提升融合图像对比度的同时,有效避免图像噪声的放大。实验结果表明,相比于传统的偏振差分方法以及独立的直方图均衡化算法,本文提出的算法能够有效提升水下图像的清晰度和对比度。     

Advances in critical technologies for hypersonic and high-enthalpy wind tunnel

Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster, higher and further. The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development. There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes. These wind tunnels are named as air-directly-heated hypersonic wind tunnel, light-gas-heated shock tunnel, free-piston-driven shock tunnel and detonation-driven shock tunnel, respectively. The critical technologies for developing the wind tunnels are introduced in this paper, and their merits and weakness are discussed based on wind tunnel performance evaluation. Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments. Three kinds of the measurement techniques considered to be of primary importance are introduced here, including the heat flux sensor, the aerodynamic balance, and optical diagnosis techniques. The techniques are developed usually for conventional wind tunnels, but further improved for hypersonic and high-enthalpy tunnels. The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future. Therefore, several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.     

(高)超声速流动试验技术及研究进展

近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。     

高超声速气动热预测技术及发展趋势

高超声速气动热预测技术是高超声速飞行器发展的关键技术之一。对高超声速气动热预测技术的发展情况进行了分析探讨。首先,简要回顾了国内外高超声速气动热理论预测及地面实验技术的发展历程;在此基础上,结合典型外形的计算与风洞试验结果的比较,重点介绍分析了气动热工程计算方法、数值模拟方法、气动热风洞试验设备的模拟能力及目前实验测试技术的研究水平;最后,对气动热预测技术的发展趋势进行了讨论,提出了气动热预测技术应研究解决的问题。     

Advances in fabrication of ceramic corundum abrasives based on sol–gel process

Corundum abrasives with good chemical stability can be fabricated into various free abrasives and bonded abrasive tools that are widely used in the precision machining of various parts. However, these abrasives cannot satisfy the machining requirements of difficult-to-machine materials with high hardness, high strength, and strong wearing resistance. Although superhard abrasives can machine the above-mentioned materials, their dressing and manufacturing costs are high. By contrast, ceramic corundum abrasives fabricated by sol–gel method is a cost-effective product between conventional and superhard abrasives. Ceramic corundum abrasives exhibit self-sharpening and high toughness. In this review, the optimization methods of ceramic corundum abrasive properties are introduced from three aspects: precursor synthesis, particle shaping, and sintering. Firstly, the functional mechanism of seeds and additives on the microstructural and mechanical properties of abrasives is analyzed. Specifically, seeds can reduce the phase transition temperature and improve fracture toughness. The grain size and uniformly dense structure can be controlled by applying an appropriate amount of multicomponent additives. Then, the urgent need of engineering application and machinability of special shape ceramic corundum abrasives is reviewed, and three methods of abrasive shaping are summarized. The micromold replication technique is highly advanced and can be used to prepare functional abrasives. Additionally, the influence of a new sintering method, namely, two-step sintering technique, on the microstructural and mechanical performance of ceramic corundum abrasives is summarized. Finally, the challenge and developmental trend of the optimization of ceramic corundum abrasives are prospected.